OptiMate Solar 10W

MSRP $114.89

6-step 12V 0.83A sealed solar battery saving charger & maintainer

OptiMate Solar 10W, the smartest sun powered 24-7 maintainer for your motorcycle, ATV, Side by Side or personal water craft’s 12V battery – Charger by day, monitor by night!

  • Smart fully sealed charge controller converts solar power and delivers max. 0.83A in full sun OR power pulses in cloudy weather, to your 12V lead-acid (STD, AGM, GEL) starter or deep cycle battery.
  • Controller’s ‘night’ monitor mode indicates battery’s state of charge on a 3 LED panel – Status of your battery is available night and day!
  • Wide spectrum weatherproof polycrystaline panel with corner mounts – Works in any weather!
  • Unique pulse save mode recovers ‘dead flat’ sulphated batteries from as low as 1V – The most advanced solar recovery program!
  • OptiMate Solar smart pulse maintenance guarantees more battery power, longer battery life!

 

 

Video

FAQ

The OptiMate Solar DUO is suited for charging 12V lead acid and 12.8V / 13.2V Lithium (LifePO4 / LFP) batteries.

OptiMate Solar DUO can charge and maintain the following battery types:
STD: 12V ‘wet’ cell / refillable lead-acid battery. Liquid acid can leak out if battery is turned on its side.
AGM: 12V sealed lead-acid battery, acid is fully contained within the battery. A 12V AGM battery holds a higher charged voltage than
STD lead-acid batteries.
GEL: 12V GEL sealed lead-acid battery, acid is fully contained within the battery. A GEL battery holds similar charged voltages to AGM.
LFP: 12.8V / 13.2V sealed Lithium Ferrous Phospate battery. Lithium batteries contain no acid. A LFP battery holds a higher charged
voltage than AGM / GEL.
Important - OptiMate Solar DUO is suitable ONLY for 4 series cell Lithium Ferrous Phosphate or Lithium Iron Phosphate batteries. DO
NOT ATTEMPT TO CHARGE any other type of Lithium battery

1. Solar panel cable
2. Controller input
3. Controller output cable
4a. O-01 Permanent battery lead
4b. O-04 Battery clips 5. Battery


This will also be a video with the upcoming DUO solars

MONITOR MODE - When the solar panel stops delivering power (sun has gone down in the evening or cloud covers sun) the
OptiMate Solar DUO controller changes to BATTERY MONITOR mode and will now indicate battery charge level every 3 seconds.
LED 2, 3, 4 or 5 indicate battery charge level.

CHARGE MODE - LED #1 lights if the solar panel can deliver charge. LED #1 flashes when charge current is delivered to the
battery. Speed of flashing corresponds to current delivered i.e. fast means high current, slow means low current (cloudy
conditions or battery is not accepting high current).
LED 2, 3, 4 or 5 indicate charge progress whilst CHARGE LED #1 is flashing. If no battery is connected only LED #1 turns on.


If the battery is sufficiently charged, LED #4 or 5 will immediately light together with LED #1 (flashing).

If the battery needs further charging LED #2 or LED #3 will light together with LED #1 (flashing).

Options

SKU: TM522-1 Category:

More

INCLUDED: Weatherproof battery lead, standard battery clip set & 10W solar panel

BUY

MSRP = Manufacturer Recommended Retail Pricing. Price in EURO and GBP include VAT of 20%. VAT in your region may differ. Price in USD and CAD do not include sales tax.

OptiMATE Solar 10W
SKU TM-522-1
MSRP USD $114.89

OptiMATE Solar 10W
SKU TM-522-1
MSRP CAD $171.99

OptiMATE Solar 10W
SKU TM-522-1
MSRP EUR €125.90

OptiMATE Solar 10W
SKU TM-522-1
MSRP GBP £114.99

Specifications

 

 CHARGE

Saves flat batteries from as low as 1V with its unique pulse action.
Fastest charge is delivered as ‘smart charge’ control selects pulse or continuous charge according to sunlight strength.
Intelligent maintenance continues the next day if battery retained charge overnight, otherwise the program reverts to OPTIMIZE step.

 MONITOR

Battery condition is displayed every 3 seconds. Ready indication for STD and hi-performance AGM batteries. Draws less than 0.5mA during monitor mode.
Automatically switches to CHARGE when solar power is sufficient.

MOUNTING

The OptiMate charger-monitor controller is separate to the solar panel and can be placed close to the vehicle or battery so that charge and maintenance progress can be easily followed. The solar panel must be mounted and angled to receive direct sunlight. The reach / distance between battery and panel is 315cm / 124″. To extend, use OptiMate Cable Extenders O-03, O-13 or O-23 and insert between the solar panel and the OptiMate charge-monitor controller.

Outer dimension, including corner mount brackets : Width = 29.3 cm / 11  1/2 ”  Height = 32.5cm / 12  5/8 ”  Depth = 2.6 cm / 1 ”

Solar panel :

POWER : 10 Watts (max.)

VOLTS : 12V nominal, 22V maximum.

USE : Outdoor.

STYLE : Weatherproof, aluminium frame with 4 x mounting brackets, output cable 200cm / 80″ with SAE connector.

 

OptiMate Charge controller:

CHARGING AMPS : 0.83A from 10W panel (max. average current), 3-5A pulse current

USE : Indoor / Outdoor  (lowest temperature: -4°F / -20°C).

SAVE : Low Volt Start of 1V

IDEAL FOR : STD, AGM & GEL 12V batteries from 2 – 240Ah.

INPUT : 15 – 22V

STYLE : Weatherproof charge controller case.

INCLUDED: Weatherproof battery lead, standard battery clip set & 10W solar panel

SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.

WARRANTY: 3-year limited replacement warranty.

Documents