O-118PD USB charger | M6 rings > 1xUSB-C | perma-fit |20W
Intelligentes 20W PD USB-C Ladegerät für Motorräder (zur Installation in der Bordelektrik), mit Standby-Modus und Erfassung der Fahrzeugbatteriespannung.
Der OptiMate USB O-118PD ermöglicht sicheres und schnelles USB-Laden jedes Geräts, das außen am Lenker oder in Ihrem Tank oder Packtaschen montiert ist – Lade dein Smartphone, GPS-Gerät, deine Kamera, dein Tablet oder deine Kopfhörer auf.
Lädt 1 USB-Gerät mit einer verfügbaren Leistung von bis zu 20W auf – Das Ladegerät passt die Spannung an das angeschlossene Gerät an, für sicheres und schnelles Laden.
Ideal für 12V FLA/AGM/GEL & 12.8V LiFeP04 / Lithiumbatterien in Ihrem Motorrad – Kabelführung dorthin, wo USB-Aufladung benötigt wird!
Anschlusskabel mit M6 / 1/4″-Ringkabelschuhen, passend für alle Batteriepole von Powersport-Fahrzeugen – Sicherung geschützt!
WEITERE MERKMALE:
Optionen
Häufig gestellte Fragen
The green light means the motorcycle engine is off and the O-118PD is in standby mode, monitoring the battery voltage. Start the motorcycle and, when the battery voltage rises above 13.5V, the blue USB light will turn on and USB charging will be available.
If no light is showing, the vehicle battery voltage may be below 9V.
Start the motorcycle and allow the charging system to raise the battery voltage above 13.5V. The blue USB light should then turn on, indicating that USB charging is active.
The blue light blinks when the engine has been switched off and the O-118PD is in its 1-hour USB charging period. After 1 hour, it automatically switches to standby mode to help prevent the motorcycle battery from being drained.
Mehr

Video
Coming soon.Check out our YouTube channel for all our video’s.
SPEZIFIKATIONEN
Charge your phone, GPS, camera, tablet & headphone with your weatherproof charger, on your motorcycle or up to 85″ / 212cm away from 12V supply.LENGTH: 85" / 212cmCHARGE CONNECTOR (INPUT): O-31 battery lead with M6 (1/4”) rings / eyelets OR 2-pin SAE (if disconnected from O-31).POWER (INPUT): Vehicle 12V system with 12V lead-acid or 12.8V lithium battery.CHARGE CONNECTOR (OUTPUT): 1x USBPOWER (OUTPUT): 20W max (5V / 9V / 12V dynamic output)OPERATION: fully automatic
- Vehicle battery protection: Low input (<12.4V) auto-off protects vehicle battery from total discharge. Supply range: 12 to 15Vdc.
- Turns on if vehicle battery voltage increases above 13.5V.
- 3 LED battery monitor
- Short circuit, overheat, over-voltage protection.
- O-31 battery lead includes in-line fuse.
OPERATION (Voltage):USB ON - vehicle engine running / Vb > 13.5V – unlimited USB output, USB LED on. Delivers USB power when vehicle engine is charging battery.USB 1 HOUR - vehicle engine off / Vb ≤ 13.4V – 1 hour USB output, USB LED blinking (1 hour to standby). Go to standby mode after 1 hour or voltage < 12.4V.STANDBY MODE – Monitoring voltage, turns back on if vehicle battery voltage increases above 13.5V.OFF - vehicle battery voltage low, Vb < 12.4V.CABLE RATING: SPT-1USE: -20°C/-4°F very low temperature, remains flexible at ‘below freezing’ temperaturesSTYLE: Fully enclosed electronic circuitry with multiple LEDs, unique seal and cap design for USB socket; use any USB cable, seals when inserted.WARRANTY: 3-year limited replacement warranty












