OptiMate 7 Select
GOLD series: 9-step 12V 10A sealed battery saving charger & maintainer
OptiMate 7 Select, the ‘PRO choice’ battery charger that gets the full potential out of your high performance 12V battery. Includes stable power support for tuning / troubleshooting.
Ideal for 12V starter (SLI) and deep cycle lead-acid batteries found in the vehicles / craft above.
Select charge voltage of 14.4V for most batteries or 14.7V for premium AGM batteries, or select Power Supply support mode – Selection remains in memory even if AC power is lost.
Power Supply mode provides constant power for vehicle tuning, diagnostics and troubleshooting.
Fully automatic multi-step program brings the battery safely to full charge – Connect to the battery and OptiMate 7 Select does the rest, no supervision required!
All OptiMate battery chargers listed below accept global input of 100-240Vac 50-60Hz, only the power plug TYPE is different to comply with national / regional electrical safety laws.
OptiMate 7 is a great choice to charge and maintain your spiral cell batteries
Select 14,4V or 14,7V to match the specified charge voltage for your 12V battery. Use 14,4V for filler cap or sealed STD batteries. 14,7V can be used for high performance batteries, like Odyssey, Optima, North Star
Connect the charger to AC power. Push and release the select button to choose 14,4V (LED 1a) or 14,7V (LED 1b). Then connect to the battery.
To select the power supply mode : push and hold the select button for 3 seconds while the charger remains connected to AC power and to the battery. After 5 seconds, LED 1a, LED 1b and LED6 light together. The OptiMate is now in power supply mode.
In power supply mode, the OptiMate delivers stable power at maximum current for vehicle system reprogramming, show room vehicle demo's or to retain memorised settings when the battery cables are disconnected.
The power supply program will charge the battery up till 13,6V only, while the battery needs to be charged, according the type of batttery, up till 14,4V or 14,7V. Due to that, we do not recommend to use the Power supply program to charge your battery.
The OptiMate 7 select will first test the battery and start automatically to recover the battery whenever necessary.
Similar models with different features.
In store packaging
MSRP = Manufacturer Recommended Retail Pricing. Price in EURO and GBP include VAT of 20%. VAT in your region may differ. Price in USD and CAD do not include sales tax.
IDEAL FOR: AGM, GEL, STD, EFB & DEEP CYCLE 12V batteries from 3 – 240Ah.
CHARGING AMPS: 10A (Ampmatic current)
CHARGING VOLTS: 12V range (3 modes): 0.5V – 14.4V, 0.5V – 14.7V, 0.5V – 13.6V (PowerSupply)
FEATURES: PowerSupply, to aid in diagnostics and troubleshooting.
USE: Indoor / Outdoor (lowest temperature: -40°F / -40°C).
INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed).
STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector.
SAVE : Low Volt Start of 0.5V + 2-step desulphation recovery.
SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.
INCLUDED: Weatherproof battery lead & battery clip set.
WARRANTY: 3-year limited replacement warranty.