PRO Chargers
OPTIMATE PROFESSIONAL CHARGERS
The PRO series is designed for the serious workshop, battery specialist or retailer: high-performance charger-tester tools built for pro use. With selectable charge programs and advanced “PRO” features, these units give you control, diagnostics and reliability.
AUTOMATIC – OptiMate battery chargers are fully automatic once the correct battery chemistry or mode has been selected. |
ACTIVATES NEW BATTERIES – Prepare any motorcycle / powersport battery for first use. |
RECOVERS DEEP DISCHARGED BATTERIES – Recover Pb-lead-acid or Li-LFP (LiFePO4) batteries from as low as 0.5 Volts. Resets and recovers Lithium LFP battery with BMS protection. |
STATE-OF-HEALTH TEST – GOOD (80-100%), OK (60-80%), BAD (<60%) – helps determine whether a battery should be replaced. |
GLOBAL INPUT – Input power (100-240V 50-60Hz) is accepted through a standard IEC320 C8 socket i.e. the AC supply cord can be changed to suit the AC wall connector in any region. |
LOWER POWER USAGE – OptiMate battery chargers are energy efficient certified. OptiMate’s advanced electronic technology reduces electricity usage and saves you money. |
INTERNATIONAL CERTIFICATION: – CE, UKCA, NRTL (UL & CSA), PSE, SAA. |
CHOOSING THE RIGHT CHARGER
Featured Models
OptiMate PRO-1 DUO (TM-650)
Ideal for on-vehicle service and fast battery charging / preparation.
3 SELECTABLE MODES – 12V lead-acid OR 12.8V/13.2V LiFePO₄ lithium OR Power Supply. |
ONE POWER CHARGE BANK – 10 Amp max, Ampmatic charge control adjusts current to match smaller battery size. |
EASY SERVICE / BATTERY SUPPORT – Power supply mode provides stable support to vehicle’s battery needed for electrical troubleshooting or software updating. |
BATTERY SAVING / RESET – Smart recovery mode for deep-discharged batteries OR reset the low volt protection of a lithium battery on the vehicle. |
OptiMate PRO-4 DUO (TM-670)
Designed for demanding workshops and service centres needing multiple-bank professional charging.
3 SELECTABLE MODES – 12V lead-acid OR 12.8V/13.2V LiFePO₄ lithium OR 60’ fast new battery preparation. |
FOUR INDEPENDENT CHARGING BANKS – 5 Amp max per bank, Ampmatic charge control adjusts lower for smaller battery size. |
AUTOMATIC FAST BATTERY ACTIVATION – 60’ mode for fast preparation of a new battery. |
OptiMate G10 12V/16V (TM-651)
The most advanced charger for racing and performance batteries as well as demanding professional use.
High-power multi-voltage charging – 10A at 12V and 8A at 16V with adaptive (Ampmatic) current. |
Multi-chemistry support – Charges 12V & 16V AGM lead-acid and LiFePO4 batteries. |
Recovery & BMS reset – Supports low-voltage recovery and reset of Lithium (LFP) BMS protection. |
PowerSupply / Tune mode – Provides stable output for diagnostics, tuning or workshop use. |
Temperature regulation – Intelligent regulation adjusts charge based on thermal conditions. |
Which PRO model is right for you?
Choose the TM-650 OptiMate PRO-1 DUO if you’re working with vehicles, motorcycles or performance batteries in single-station use and need accuracy + diagnostics.
Choose the TM-670 OptiMate PRO-4 DUO if you need a multi-bank solution (e.g., a workshop, dealer environment, or multiple vehicles simultaneously) with full diagnostics and independent charging stations.
Choose the TM-651 OptiMate G10 12V/16V if you need high-current charging, advanced programs for race/performance batteries, multi-chemistry support (12V/16V AGM & LiFePO4), and extra modes like FASTcharge, BMS reset, and PowerSupply for professional battery preparation and tuning.
Learn more about our OptiMate Series here!