OptiMate 6 Select

MSRP $134.95

GOLD series: 9-step 12V 6A sealed battery saving charger & maintainer

OptiMate 6 Select is the ‘PRO choice’ battery charger that gets the full potential out of your high performance 12V battery. – Includes stable power support for tuning / troubleshooting.
The OptiMate 6 battery charger is recommended for batteries of sports cars, 4x4 cars, tractors, RV, maritime and motorcycles.

 

Select charge voltage of 14.4V for most batteries or 14.7V for premium AGM batteries, or select Power Supply support mode – Selection remains in memory even if AC power is lost.
With the OptiMate 6 battery charger you can select the charge voltage of 14.4V for most batteries or 14.7V for premium AGM batteries or select Power Supply support mode.

 

Power Supply mode provides constant power for vehicle tuning, diagnostics and troubleshooting.
The power supply mode of the OptiMate 6 Select provides constant power for vehicle tuning, diagnostics and troubleshooting.

 

Fully automatic multi-step program brings the battery safely to full charge – Connect to the battery and OptiMate 6 Select does the rest, no supervision required!
The fully automatic multi-step program to full charge the battery safely.

 

 

MORE FEATURES:

For lead-acid (Pb) 12V automotive starter (SLI) including STD (with filler caps), AGM, GEL (sealed VRLA) & EFB and deep cycle battery types.

Automatically adjusts current to match battery size and condition.

Temperature compensation: Voltage is adjusted higher when colder, or lower when hotter.
Safe to leave connected. Full electronic protection.
Maintains battery at full charge and good health.
Saves your ‘dead’ battery from as low as 0.5V.
Tests battery state of health.
50% less energy, 50% lower cost.
√ Power Factor Correction
√ Synchronous Rectification
Weatherproof. Rated for use down to -40°C / -40°F.

Video



FAQ

OptiMate 6 is an excellent choice to charge and maintain your spiral cell batteries

Select 14,4V or 14,7V to match the specified charge voltage for your 12V battery. Use 14,4V for filler cap or sealed STD batteries. 14,7V can be used for high performance batteries, like Odyssey, Optima, North Star

Connect the charger to AC power. Put your finger on the select button to choose 14,4V (LED 1a) or 14,7V (LED 1b). Then connect to the battery.
To select the power supply mode : hold your finger on the select button for 5 seconds while the charger remains connected to AC power and to the battery. After 5 seconds, LED 1a, LED 1b and LED6 light together. The OptiMate is now in power supply mode.

In power supply mode, the OptiMate delivers stable power at maximum current for vehicle system reprogramming, show room vehicle demo's or to retain memorised settings when the battery cables are disconnected.


The power supply program will charge the battery up till 13,6V only, while the battery needs to be charged, according the type of batttery, up till 14,4V or 14,7V. Due to that, we do not recommend to use the Power supply program to charge your battery.

The OptiMate 6 select will first test the battery and start automatically to recover the battery whenever necessary.


STD, AGM and GEL 12V lead-acid batteries used for engine start & deep cycle applications. (Link: Learn here about batteries, this will be at www.optimate1.com/batteries).

Overnight charge (12h) : max battery capacity 60Ah. Max recommended size (24h) : 120 Ah


The time required for the OptiMate 6 to complete
the charge of a 50Ah battery should take no more than about 10 hours. Deep-discharged batteries may take significantly longer.


More

Includes 2 battery connection cable accessories

  1. Battery lead (replacement SKU O-11) – fits to battery in your vehicle for convenient ‘quick-connect’ charging access.

Adjustable: Fits two bolt sizes

  2. Battery clips (replacement SKU O-04) –

Fits securely to square, round or flat battery posts.

 

In store packaging

SKU: TM-37x Category:

Models

Available models are listed below. 

All OptiMate battery chargers listed below accept global input of 100-240Vac 50-60Hz, only the power plug TYPE is different to comply with national / regional electrical safety laws.

TYPE A – Canada / United States of America

TYPE C – Europe

TYPE G – United Kingdom

Find my plug?        

BUY

MSRP = Manufacturer Recommended Retail Pricing is displayed above. (Currency selector > top right).
Price in EURO and GBP include VAT of 20%. VAT in your region may differ. Price in USD and CAD do not include sales tax.

TecMate do not sell product directly to the consumer. Find your nearest retailer by selecting the appropriate model below.

 

OptiMATE 6 Select
SKU TM-371 

OptiMATE 6 Select SKU TM-371

OptiMATE 6 Select
SKU TM-370

OptiMATE 6 Select
SKU TM-372

Specifications

IDEAL FOR: AGM, GEL, STD, EFB & DEEP CYCLE 12V batteries from 3 – 144Ah.

CHARGING AMPS: 6A (Ampmatic current)

CHARGING VOLTS: 12V range (3 modes): 0.5V – 14.4V, 0.5V – 14.7V, 0.5V – 13.6V (PowerSupply)

OPERATION:  Selectable

Steps: 9

FEATURES: POWER SUPPLY mode delivers stable power for vehicle system reprogramming, show room vehicle demo or retaining memorised settings when battery cables are disconnected to fit powered accessories or replace the battery.

USE: Indoor / Outdoor  (lowest temperature: -40°F / -40°C).

INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed).

STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector.

SAVE : Low Volt Start of 0.5V + 2-step desulphation recovery.

SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.

INCLUDED: Weatherproof battery lead & battery clip set.

WARRANTY: 3-year limited replacement warranty.

Documents

Versions

Version 2 

Click on the image to see product page.