The OptiMate 5 Select 6V/12V is the solution for saving, charging and maintaining all your 6V and 12V lead-acid batteries.
Charging, testing and maintaining 6V or 12V AGM, GEL, EFB or STD starter or “DEEP CYCLE” batteries. Select the desired charge voltage and the charger will do the rest!
Safe charging selection for a 6V or 12V battery. The OptiMate will not charge if the selected voltage does not match the battery voltage!
Saves 6V batteries from as low as 1 Volt – the only charger that can desulphate and recover 6V batteries!
Saves 12V batteries from as low as 2 Volt – for deeply discharging 12V batteries you manually confirm the SAVE program.
OptiMate’s smart “24-7-365” continuous maintenance program guarantees more battery power and a longer battery life!
Available models: All OptiMate battery chargers listed below accept global input of 100-240Vac 50-60Hz, only the power plug TYPE is different to comply with national / regional electrical safety laws.
STD, AGM and GEL 6V and 12V lead-acid batteries used for engine start & deep cycle applications. (Link: Learn here about batteries, this will be at www.optimate1.com/batteries).
For 6V batteries from 12Ah to 192 Ah for 24-7 battery maintenance. Can recharge batteries up to 96Ah within 24hours.
For 12V batteries from 8,5Ah to 134 Ah for 24-7 battery maintenance. Can recharge batteries up to 67Ah within 24hours.
The time required for the OptiMate™5 to complete a charge on a flat but not severely discharged and otherwise undamaged battery is roughly equal to 1/3 the battery’s Ah rating, so a 60Ah battery should take no more than about 20-25 hours to progress to the Maintenance charge cycle. Deep-discharged batteries may take significantly longer.
The OPTIMIZE mode starts when the voltage has reached 7.2V / 14.4V for the first time during CHARGE mode.
Selection of the 6V or 12V charge program is done by pushing the select touch button. Disconnect the charger from the battery and hold down the button for 3 seconds to switch the program.
Yes, if the battery Voltage does not match the Voltage charge program, the OptiMate 5 6V/12V will not charge.
Similar models with different features.
In store packaging
MSRP = Manufacturer Recommended Retail Pricing. Price in EURO and GBP include VAT of 20%. VAT in your region may differ. Price in USD and CAD do not include sales tax.
IDEAL FOR: STD, AGM & GEL 6 & 12V batteries from 8 – 120Ah (up to 192Ah for 6V).
CHARGING AMPS: 4A (6V) / 2.8A (12V) (Ampmatic)
CHARGING VOLTS: nominal: 12V range: 1V – 14.4V / nominal: 6V range: 1V – 7.2V
OPERATION: Fully automatic
FEATURES: SAVE & CHARGE all 6V & 12V lead-acid batteries. the VoltMatic micro-processor automatically makes the correct charge voltage selection
USE: Indoor / Outdoor (lowest temperature: -4°F / -20°C).
INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed).
STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector.
SAVE : Low Volt Start of 1V + 2 step desulphation recovery.
SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.
INCLUDED: weatherproof battery lead & battery clip set.
WARRANTY: 3-year limited replacement warranty.