Weatherproof battery lead with state of charge monitor for the 12.8V/13.2V LifePO4 / LFP battery in your parked performance vehicle – 24-7 battery status at a blink of an LED!
With M6 / 1/4″ – M8 / 5/16″ ringlets that perfectly fit to powersport and most automotive battery terminals, and 15A fuse that protects the -40 rated cable and electronics – Premium quality!
Sealed monitor with 3 LEDs indicate battery state of charge from full to empty for 12.8V / 13.2V LiFePO4 / LFP batteries – LED corresponding to charge level blinks every 5 seconds.
SAE quick connect charge port for charging battery when needed – With weatherproof sealing cap when vehicle is moving!
Displays charge system status when engine is running, with 4th LED warning if system is overcharging above 14.6V that can damage lithium – Easy pre-ride check at a glance to see if battery is receiving the correct charge.
CHARGE CONNECTOR: 2-pin SAE, protected from dirt and liquid with rubber sealing cap and shroud.
OPERATION: 2 automatic Modes – Battery charge level monitor (single LED blink mode) & Charging system test (arrow mode).
Vehicle storage: 3 LEDs display ‘full to empty’ voltage range for 12.8V/13.2V Lithium batteries (LFP/LiFePO4/Lithium nano Phosphate); 4th LED warns when vehicle system or connected battery charger is OVERCHARGING! (long term draw less than 0.2mA).
Vehicle running: LED arrow mode activates when charge voltage reaches an effective lithium charge range of 14.2V – 14.5V (√green LED). OVERCHARGE warning activates at +14.6V.
CABLE RATING: 16 AWG (1.31mm2) SPT-2W
FUSE: 15 Amp
USE: -40°C/-40°F very low temperature, remains flexible at ‘below freezing’ temperatures
STYLE: Fully enclosed electronic circuitry with 4 LEDs, SAE charge connector with rubber sealing cap & shroud
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.