OptiMate USB O-108
MSRP $33.95
Smart in-line 3300mA USB charger, with standby mode & vehicle battery monitor.
The fully sealed in-line SAE to USB 3300mA charger with 150cm / 60″ of cable (also available: the O-108KIT with 150cm / 60″ of cable + 50cm / 20″ O-31 battery lead), delivers safe and fast USB charging to your phone or other device that needs charging, either on the handlebar or inside your tankbag or pannier – Charge cable routes to where USB charging is needed!
- Connects to battery lead with industry standard SAE 2-pin connector – In-line seal makes 12V connection weatherproof!
- Charges 1x USB device with up to 3300mA current available (or get optional O-110 USB splitter and charge 2 devices). – Charge current adapts to connected device for safe recharging.
- Weatherproof USB charge port easily zip-tie to handlebar, strut or even brake / clutch cable – Seals againt inserted USB cable for charging in any weather!
- Built in protection turns off USB charging & prevents your parked vehicle’s LFP (LiFePO4) or AGM (Pb) battery from draining – Starts back up when vehicle engine fires up.
- Monitors and displays parked vehicle’s battery status – Indicates battery is ‘start ready’ at the blink of an LED!
Options
FAQ
When the O-118 turns off the blue ‘USB’ LED and your battery’s charge level remains above 50%, the LED will blink.
AGM LED blinking – You have a sealed AGM lead-acid (Pb) battery and the voltage is between 12.4V to 13V. (AGM: 50% = 12.4V, 100% = 12.7V to 13V)
LFP LED blinking – You have a LFP lithium batteryand the voltage is at 13.1V or higher. (LFP: 50% = 13.1V, 100% = 13.4V to 14V)
When the O-118 turns off the blue ‘USB’ LED and your battery’s charge level remains above 50%, the LFP LED will blink.
LFP state of charge (SOC): 50% = 13.1V, 100% = 13.4V to 14V.
If the AGM LED blinking your LFP lithium battery is holding less than 50% charge i.e. the voltage is between 12.4V and 13.09V.
More
Video
BUY
MSRP = Manufacturer Recommended Retail Pricing. Price in EURO and GBP include VAT of 20%. VAT in your region may differ. Price in USD and CAD do not include sales tax.
Specifications
Charge your phone, GPS, camera & tablet with your weatherproof charger, on your motorcycle.
LENGTH: 60" / 150cm
CHARGE CONNECTOR (INPUT): 2-pin SAE
POWER (INPUT): Vehicle 12V system with 12V lead-acid or 12.8V lithium battery.
CHARGE CONNECTOR (OUTPUT): 1x USB
POWER (OUTPUT): 3300mA @ 5V
OPERATION: fully automatic
- Vehicle battery protection: Low input (<12.4V) auto-off protects vehicle battery from total discharge. Supply range: 12.4 to 16Vdc.
- Turns on if vehicle battery voltage increases above 13.3V.
- 2 LED battery monitor
- Short circuit, overheat, over-voltage protection.
OPERATION (Voltage)
- USB ON - 13.3V to 18V – unlimited USB output, USB LED on. Delivers USB power when vehicle engine is charging battery.
- USB 1 HOUR - 12.4V to 13.3V – 1 hour USB output, USB LED on. Go to standby mode after 1 hour or voltage < 12.4V.
- STANDBY MODE – Monitoring voltage, turns back on if vehicle battery voltage increases above 13.3V.
- AGM / LFP MONITOR - LED blink every 5 seconds if battery charge ≥ 50% , sufficient to start vehicle engine.
- LED LFP: 13.1V to 13.3V.
- LED AGM: 12.4V to 13.1V.
- NO LED < 12.4V.
- OFF ≤ 9V
CABLE RATING: SPT-1
USE: -20°C/-4°F very low temperature, remains flexible at ‘below freezing’ temperatures
STYLE: Fully enclosed electronic circuitry with multiple LEDs, unique seal and cap design for USB socket ; use any USB cable, seals when inserted.
WARRANTY: 3-year limited replacement warranty
Versions
