OptiMate USB O-118

MSRP $38.95

Smart in-line 3300mA motorcycle USB-C charger, with standby mode and vehicle battery monitor.

The OptiMate USB O-118 delivers safe and fast USB charging of any device mounted outside on the handlebar or inside your tank or pannierCharge your phone, GPS, camera or tablet.
The O-118 motorcycle usb c charger charges your phone, GPS, camera or tablet.

 

Ideal for 12V AGM & 12.8V LiFeP04 / LFP lithium batteries in your motorcycleCable routes to where USB charging is needed!
The O-118 motorcycle usb c charger is ideal for connection to 12V AGM & 12.8V LiFeP04 / LFP lithium batteries, found in your motorcycle.

 

Charges 1x USB device with up to 3300mA current available Charge current adapts to connected device for safe recharging.
3300mA motorcycle usb c charger at 5V.

 

Supply cable (50cm / 20″) with M6 / 1/4″ rings fit all powersport battery terminalsFuse protected!
O-118 motorcycle USB c charger cable length + O-31 battery cable extension.
O-118 motorcycle USB C charger with M6 / 1/4″ rings and SAE connection.

 

 

MORE FEATURES:

Vehicle battery Volts ≥ 13.3V: USB on.

Built in protection turns off USB charging after 1 hour to prevent your parked vehicle’s battery from draining.
Rated for normal T° and outdoor use.

Options

FAQ

Phones with the ability to provide power or charge external USB devices via their USB-C port are incorrectly identifying the O-118 USB charger as a device that can receive charge. The message confirms the phone ‘cannot use this accessory’ and it is not delivering charge to the O-118 as it does not have a battery, in other words, the O-118 is not draining your phone’s battery.

The message will self-cancel (or may remain on screen) when the O-118 delivers charge to your phone  (USB blue LED = ON). If the message remains on screen, please press ‘OK’ on the message and it will disappear.

Affected phones: Iphone 15, Google Pixel

Affected O-118: made in 2022 & 2023, with date stamp on side. When it happens: O-118 turns off due to vehicle battery below 12.4V or, O-118 goes to stand-by after one hour when vehicle engine is not running. 

When the O-118 turns off the blue ‘USB’ LED and your battery’s charge level remains above 50%, the LED will blink.

AGM LED blinking – You have a sealed AGM lead-acid (Pb) battery and the voltage is between 12.4V to 13V. (AGM:  50% = 12.4V, 100% = 12.7V to 13V)

LFP LED blinking – You have a LFP lithium batteryand the voltage is at 13.1V or higher. (LFP:  50% = 13.1V, 100% = 13.4V to 14V)

When the O-118 turns off the blue ‘USB’ LED and your battery’s charge level remains above 50%, the LFP LED will blink.

LFP state of charge (SOC):  50% = 13.1V, 100% = 13.4V to 14V.

 If the AGM LED blinking your LFP lithium battery is holding less than 50% charge i.e. the voltage is between 12.4V and 13.09V.

More

Video

BUY

MSRP = Manufacturer Recommended Retail Pricing is displayed above. (Currency selector > top right).
Price in EURO and GBP include VAT of 20%. VAT in your region may differ. Price in USD and CAD do not include sales tax.

TecMate do not sell product directly to the consumer. Find your nearest retailer by selecting the appropriate model below.

 

US SKU: O-118

CAD SKU: O-118

EU SKU: O-118

UK SKU: O-118

SKU: O-118 Categories: , ,

Specifications

Charge your phone, GPS, camera & tablet with your weatherproof charger, on your motorcycle or up to 80″ / 200cm away from 12V supply.

LENGTH: 80" / 200cm

CHARGE CONNECTOR (INPUT): O-31 battery lead with M6 (1/4”) rings / eyelets OR 2-pin SAE (if disconnected from O-31).

POWER (INPUT): Vehicle 12V system with 12V lead-acid or 12.8V lithium battery.

CHARGE CONNECTOR (OUTPUT): 1x USB

POWER (OUTPUT): 3300mA @ 5V

OPERATION:  fully automatic

  • Vehicle battery protection: Low input (<12.4V) auto-off protects vehicle battery from total discharge. Supply range: 12.4 to 16Vdc.
  • Turns on if vehicle battery voltage increases above 13.3V.
  • 2 LED battery monitor
  • Short circuit, overheat, over-voltage protection. O-31 battery lead includes in-line fuse.

OPERATION (Voltage):

  • USB ON - 13.3V to 18V – unlimited USB output, USB LED on. Delivers USB power when vehicle engine is charging battery.
  • USB 1 HOUR - 12.4V to 13.3V – 1 hour USB output, USB LED on. Go to standby mode after 1 hour or voltage < 12.4V.
  • STANDBY MODE – Monitoring voltage, turns back on if vehicle battery voltage increases above 13.3V.
  • AGM / LFP MONITOR - LED blink every 5 seconds if battery charge  ≥ 50% , sufficient to start vehicle engine.
    • LED LFP: 13.1V to 13.3V.
    • LED AGM: 12.4V to 13.1V.
    • NO LED < 12.4V.
  • OFF ≤ 9V

CABLE RATING: SPT-1

USE: -20°C/-4°F very low temperature, remains flexible at ‘below freezing’ temperatures

STYLE: Fully enclosed electronic circuitry with multiple LEDs, unique seal and cap design for USB socket; use any USB cable, seals when inserted.

WARRANTY: 3-year limited replacement warranty

USB Product

Vehicle Connection

Special use