OptiMate USB O-100
Smart 2400mA USB charger, with standby mode & vehicle battery monitor.
MSRP USD $19.90
Hit
-
0 %
-
Overview
The portable & compact SAE to USB 2400mA charger for safe and fast charging of any USB device, including your phone, camera or GPS.
- Connects to battery lead with industry standard SAE 2-pin connector – Seals perfectly when mated with OptiMate SAE!
- Charges 1x USB device with up to 2400mA current available (or get optional O-110 USB splitter and charge 2 devices). – Charge current adapts to connected device for safe recharging.
- Creates weatherproof seal against inserted USB cable, or ‘rideproof’ cap seals when not in use – Worry free phone, camera or GPS charging in any weather!
- Built in protection turns off USB charging & prevents your parked vehicle’s LFP (LiFePO4) or AGM (Pb)battery from draining – Starts back up when vehicle engine fires up.
- Monitors and displays parked vehicle’s battery status – indicates battery is ‘start ready’ at the blink of an LED!
-
Options
Options
Similar models with different features.
-
More
More
-
Video
Video
- BUY
-
Specifications
Specifications
Smart 2400mA USB charger, with standby mode & vehicle battery monitor.
LENGTH: 8cm
CHARGE CONNECTOR (INPUT): 2-pin SAE
CHARGE CONNECTOR (OUTPUT): 1x USB
CHARGING AMPS: 2400mA @5V
OPERATION: fully automatic
- Smart stand-by mode: USB output turns off 1 hour after engine stopped or immediately if voltage reduces below 12.4V.
- 2 LED battery monitor (when USB output off) – battery status is displayed every 5 seconds.
- Short circuit, overheat, over-voltage protection.
INPUT: Vehicle 12V system with 12V lead-acid or 12.8V lithium battery.
OPERATION (Voltage)
- USB ON – 13.3V to 18V – unlimited USB output, USB LED on. Delivers USB power when vehicle engine is charging battery.
- USB 1 HOUR – 12.4V to 13.3V – 1 hour USB output, USB LED on. Go to standby mode after 1 hour or voltage < 12.4V.
- STANDBY MODE – Monitoring voltage, turns back on if vehicle battery voltage increases above 13.3V.
- AGM / LFP MONITOR – LED blink every 5 seconds if battery charge ≥ 50% , sufficient to start vehicle engine.
- LED LFP: 13.1V to 13.3V.
- LED AGM: 12.4V to 13.1V.
- NO LED < 12.4V.
- OFF ≤ 9V
STYLE: Fully enclosed electronic circuitry with multiple LEDs, unique seal and cap design for USB socket ; use any USB cable, seals when inserted.
WARRANTY: 3-year limited replacement warranty
-
Versions
Versions
Version 2
Click on the image to see product page.
VERSION of O-100 Version 1 Version 2 Version 3 Ideal for vehicle battery type 12V AGM, GEL, STD lead-acid. 12V AGM, GEL, STD lead-acid. 12.8V LiFePO4.
12V AGM, GEL, STD lead-acid.
Voltage level that trigger stand-by countdown timer (engine OFF / vehicle charge voltage too low) 13V 13.3V Time before going to stand-by (engine OFF, USB charge ON) 3 hours 1 hour Low voltage over-ride (will force stand-by mode / turn off immediately) < 12.3V < 12.3V
< 12.4V Stand-by / battery monitor mode (LED flash every 5 seconds) LED2 (blue) 12.4V – 13V
LED1 (red) < 12.4V
NO LED ≤ 9VLED ‘LFP’ 13.1V – 13.3V
LED ‘AGM’ 12.4V – 13.1V
Voltage when USB ON after standby (engine ON, vehicle battery charging, USB turns ON) ≥ 12.4V ≥ 13V ≥ 13.3V